复合材料层板中就位横向拉伸强度的研究

本文利用弹性力学和断裂力学方法对纤维增强复合材料的横向拉伸强度进行了分析，其中考虑了９０度开裂层厚度和开裂邻层的约束效应的影响，推导出正交各向异性对称铺层中昨合就位横向拉伸强度的数学表达式，得出开裂层的厚度和约束邻层铺设角对就位横向拉伸强度都有影响的结论，理论计算与Ｆｌａｇｇｓ实验结果吻合较好。     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

On adaptive spatial-temporal processing for airborne surveillanceradar systems

Implementing the optimum spatial-temporal (angle-Doppler) processor involves two crucial issues: the selection of processing configurations, and the development of adaptive algorithms which can efficiently approach the performance potential of the selected configuration. Among the three available configurations, the joint-domain, the cascade space-time, and the cascade time-space, this work shows that, in contrast to a popular belief, the detection performance potentials of both cascade configurations can fall far below that of the joint-domain optimum. In addition, this work presents a new adaptive algorithm, called the Joint-Domain Localized Generalized Likelihood Ratio detection (JDL-GLR), which is data efficient i.e., with fast convergence to the joint-domain optimum, as well as computationally efficient, together with such desirable features as the embedded constant false-alarm rate (CFAR) and robustness in non-Gaussian interference     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

飞机横侧动稳定性及反应的奇异摄动理论

应用奇异摄动法分析横侧小扰动运动的动稳定性问题,将四阶问题分解为小根、大根和复根模态,它对应于经典理论中的螺旋、滚转和荷兰滚模态,并给出了动态反应过程的解。     

对“ZY-1”FM1整星热平衡、热真空试验中有效载荷被污染情况的分析

介绍了卫星在热平衡试验后所发现的有效载荷的污染情况,通过对污染提取物的分析和试验设备的再次污染监测,找出了污染源,并对以后的防污染工作提供了借鉴.     

陶瓷量块的研制

介绍了氧化锆精细陶瓷材料性能及二氧化锆陶瓷量块的优点 ,重点介绍了陶瓷量块的主要技术参数的检测结果 ,陶瓷量块的高硬度、耐磨损、不锈蚀和氧化、线膨胀系数接近于钢、尺寸稳定、研合性好、易维护的特性使之有着良好的市场发展前景。     

VO2薄膜制备工艺及电阻开关特性研究

用溶胶－凝胶法在非晶玻璃上制备VO2薄膜，经过熔融、涂膜、烘干和热处理等工艺最后得到电阻相变2－3个量级的VO2薄膜。对烘干温度、熔融温度、膜厚和热处理温度对薄膜电阻开关特性的影响进行了研究。通过XRD（X－ray diffraction)和XPS（X－ray photoelectron spectroscopy）对薄膜的结构和价态进行分析，表明用溶胶－凝胶法制图VO2膜工艺简单，重复性好。     

8mm衰减标准装置

对8mm衰减标准装置的工作原理、系统设计、主要技术特点、误差分析等进行了详细介绍,并附有测试和分析数据。该装置达到了80dB的量程、全频段和±0.003dB/10dB的准确度。     

滑阀稳态液动力的计算和分析

以液氧/煤油补燃循环火箭发动机中流量调节器中滑阀为例,介绍了滑阀稳态液动力的一种计算方法,分析了不同结构参数下稳态液动力的变化规律,得出了滑阀的稳态液动力与滑阀位移、液流出口处的流道形状以及刃边厚度关系的一些初步结论。